Idiomas disponibles
Idiomas disponibles
ENGLISH
How to activate the safety measures
Before starting:
-
To clean windows or glass doors without a balcony, you must place a safety warning for
the persons near the objects.
-
After every use, check the safety rope does not show any damage or flaws. You must also
check the wire from the safety rope is properly secured and at the appropriate height.
Positioning the rope
-
Loosen the thread from the end of the rope and tighten it in the hole (7).
-
Secure the safety rope before using the robot, ensuring it is tight. Place the hook from the
other end of the rope to a fix and stable object at home to prevent risks. Make sure the rope
height is appropriate to prevent risks in case of accidental dropping (Fig. 6)
How to pour water/glass cleaner
Fig. 7
-
Lift the silicone tab on the water tank, located on the upper part of the window cleaning
robot.
-
Pour the liquid. Use water or glass cleaner. Do not introduce any other liquid.
How to place the Conga WinDroid robot on the glass/window
-
Hold down the On/Off button for some seconds and make sure the fan is activated.
-
Put the robot onto the glass or window. Keep it 10 cm away from the window frame.
-
Make sure the robot stays firmly on the glass before releasing it.
Warning
Hold the robot with your hand before turning it off.
How to remove the Conga WinDroid robot from the glass/window
-
When the cleaning is finished, hold the power cord tightly with one hand and detach the
robot from the glass with the other.
-
Turn the power switch off when the robot is left on a safe surface.
UPS (Uninterrupted Power System) function
This safety system will be effective when the electric circuit fails. It provides up to 30-min
autonomy depending on the charge level and the previous work.
-
The product will stop operating automatically and the red light indicator will blink.
-
Remove the robot from the glass as soon as possible. You can pull carefully from the
safety rope to detach it.
Please be reminded: the device should not be left unattended while it is connected to a power
supply.
52
