Idiomas disponibles
Idiomas disponibles
The robot vacuum
cleaner does not
charge.
The robot does not
return to the charging
base.
The main brush does
not spin.
The robot movements
or route are unusual.
7. TECHNICAL SPECIFICATIONS
Model: Conga Perfect&Clean Connected Absolute
Product reference: 05798
Voltage: 100-240 V ~, 50/60 Hz
Rated capacity: 14.4 V DC 2500 mAh
Typical capacity: 2600 mAh
Frequency bands: 2.4 GHz
Maximum Transmission Power: 17.5 dBm
Technical specifications may change without prior notification to improve product quality.
Manufactured in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL APPLIANCES
This symbol indicates that, according to the applicable regulations, the product
and/or battery must be disposed of separately from household waste. When
this product reaches the end of its shelf life, you should dispose of the batteries/
accumulators and take them to a collection point designated by the local
authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old electrical appliances and/or their batteries.
Check if the charging base indicators are on. If they are not,
contact the official Technical Support Service of Cecotec.
Clean the charging terminals with a dry cloth.
Check if the robot beeps when it gets to the charging base.
Contact the official Technical Support Service of Cecotec.
Remove the objects 1 metre on the left and right, and 2 metres in
front of the charging base.
The robot will return to the charging base faster when it is near
it. When it is far, it will take more time to identify it. Clean the
charging terminals.
Clean the main brush.
Check if the main brush is installed correctly.
Carefully clean the sensors with a dry cloth.
Restart the robot vacuum cleaner. To do so, turn the power
switch off and on.
ENGLISH
49
