Idiomas disponibles
Idiomas disponibles
ENGLISH
If the robot has the mixed tank installed with water in it, when it leaves the charging base,
-
it will turn around itself to soak the mop.
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
-
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
It is recommended to be present when the robot is scrubbing.
-
When the robot vacuum cleaner returns to the charging base, you must remove the mop.
-
Do not leave the robot vacuum cleaner charging with the mop assembled.
Spiral mode.
Fig. 23
The robot will carry out an intense cleaning of a specific area when this mode is activated. It
will start cleaning at a specific spot and will move outwards in a spiral motion (1 metre). Then,
it will return to the starting spot in an inwards spiral motion again.
Once it has finished and returns to the starting spot, the robot will start cleaning in Auto
-
mode until it runs out of battery.
Before using this mode, place it in the spot you wish to clean.
-
Press the Spiral cleaning button on the remote control or the app to activate this mode.
-
Edge mode. Fig. 24
When this mode is selected, the robot will clean along walls and around furniture (e.g.
-
table or chair legs).
-
Press the Edge cleaning button on the remote control or on the app.
Room mode. Fig.
25
-
The robot will carry out a 30-minute cleaning cycle when this mode is selected.
Press the Room cleaning button on the remote control or on the app.
-
To ensure an efficient cleaning of the room, make sure the robot stays in the room.
-
Back home mode
Press the Back home button on the robot, on the remote control or on the app (with a house
icon) in order to send the robot to the charging base. The robot vacuum cleaner will continue
vacuuming until it reaches the charging base.
Manual mode
Select the manual cleaning mode on the app or on the remote control to steer your robot
vacuum cleaner manually.
Power level function
Select the power level on the remote control or on the app to control the robot suction power
during cleaning processes. There are three suction power levels: Turbo, Normal and Eco.
44
