Information About Pellets; Pellets Preservation; Starting; Wood Pellet Loading - Lincar Olga 502 Manual Del Usuario - Mantenimiento

•
It's prohibited to use solid combustible as straw, mais, hazelnut, pinecone or other
different from indicated in this handbook. We recommend to employ always certify
combustible of Your dealers ( as table here below ).

INFORMATION ABOUT PELLETS

•
Pellets is made by wood rejection that came from saw-mill or planning industry and
wood fragment of forest industry. This raw material is shattered, dried up, crushed, with
some bound material till up to become the pellet combustible.

PELLETS PRESERVATION

•
Pellet has to be kept in a dry and clean environment.

Starting

•
The appliance should set at work only after having completed the following operations:
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
stove needs to complete the drying process of the paint. During the first heatings you can
notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations

WOOD PELLET LOADING

•
Be careful during wood pellet loading operation ! The pellet bag should not touch the
warm stove.
•
Be careful that no external corps enter into the pellet tank as pieces of bag, wood pieces
or other that can obstruct the screw feeder and damage it.
•
The wood pellet loading should be done at the top, after having removed the cover.
During stove functioning, it's advisable to employ the specific glove because the stove
surface could reach high temperature. Check frequently the level of the fuel in the tank
in order to avoid the extinguishing of the stove. The cover tank has should be always
closed, except during pellet loading. Tank Pellets capacity : information on Technical
details part.

BASIC INFORMATION

•
The stove must be switched off and kept cooling till the room temperature has been
reached before making any maintenance operation start.
•
Remove the plug after having switched off the back switch.
•
Do not disconnect the stove from the electric connection or press the switch back
during the operation. This operation can block all engines of the equipment,
hampering the evacuation of fumes inside the stove.
IT-GB-FR-ES mod. 502-502X-502L-502LX
44/120