Idiomas disponibles
Idiomas disponibles
CLEANING
THE MOTORIZED
FLOOR NOZZLE AND BLOCKAGES i
The brush roll may accumulate
debris
such as strings,
hair and fibers. This type of debris
can wrap
around
the brush and diminish
its ability
to clean effectively.
To Remove Brush Roll For Manual
Cleaning:
1. Ensure the vacuum is OFF.
2. Turn unit over to
access the brush roll.
3. Unlock
the
brush roll tab
with flat
head
screwdriver
or similar
tool
as illustrated.
4. Lift the brush roll out of the housing.
Clean
off debris
and anything
wrapped
around
the brush. You can use a pair of
scissors to remove
threads
etc.
5. Place the brush roll into the housing
by
aligning
the end to the brush drive first,
then inserting
the other end correctly
into
place.
When
installed
correctly,
the brush
roll should
spin freely.
6. Lock the brush in
place by closing the
tab as illustrated.
To Remove
Hose
Blockages:
1. To clean out the
hose, press the
hose release
tabs,
as illustrated,
and
pull the motorized
brush
powerhead
away
from the main
vacuum
body.
2. Carefully
remove
any
debris
or blockage
from
the inside of the hose.
Reattach
the motorized
brush
powerhead
onto
the vacuum
body.
NOTE:
Do not use scissors or other sharp
objects
to remove
a blockage
from the
hose as these may damage
the hose.
- 11 -
