Kuppersbusch KI6130.0SE Instrucciones De Uso página 21

Ocultar thumbs Ver también para KI6130.0SE:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
EN
2
whenever is possible. Cooking
without lid uses more energy.
appropriate base diameters in
order to match size of the cooking
zone. Pan manufacturers usually
provide top diameter of the pot that
is always larger than base diameter.
use little quantities in order to
preserve vitamins and minerals of
vegetables and set the minimum
power level that allows maintaining
the cooking. High power level
is unnecessary and a waste of
energy.
of food.
20
below.
Ensure that the power cable is plugged
in.
The container is not appropriate (it
does not have a ferromagnetic bottom
or is too small). Check that the bottom
use a larger container.
With containers which are not very
results from the transmission of energy
directly to the bottom of the container.
the power level slightly or use a
or of one piece.
60350-
No heating zone has been selected.
Be sure to select a heating zone befo-
re operating it.
and/or your fingers are wet. Keep
the touch control surface and/
or your fingers clean and dry.
The locking function is activated.
Unlock the controls.
The induction zones have a fan to
keep the electronics cool. This only
operates when the electronic circuits
get hot. It stops again when the
circuits cool whether the hob is turned
on or not.
pot or pan on a hotplate or it is of an
unsuited type.
81 or C82
Excessive temperature in the electro-
nics or on the glass. Wait for a while
for the electronics to cool down or
remove the pot or pan so that the
glass can cool.
message C90 appears on the power
indicators (3):
sensor is covered and doesn't allow
switching on the cooktop. Remove the
possible objects or liquids keeping the
until the message disappears.
on the
loading

Este manual también es adecuado para:

Ki6130.0sr