Idiomas disponibles
Idiomas disponibles
CLEANING
THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.
1. Open the filter cover by pressing and pulling the handle
Filter
of the filter cover with your finger,
cover
2.
3.
4.
5.
6.
Take the drain tube that is hooked on the
. Step 1
step
2
guide hook to the front, holding the drain cap.
...........
Do not pull the drain tube with excessive force.
Place a bowl under the washing machine to
catch any remaining water, hold the drain tube
_:,:_:
with one hand, and turn the emergency drain
cap counter clockwise with the other hand to
....
_i
separate it..........
Drain the remaining water completely.
Hold and turn the debris filter cap counterclockwise
to separate it.
Debris filter cap
Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
7.
8.
When you have finished cleaning the filter, turn the debris
filter clockwise to assemble it (When assembling the filter,
turn the filter so that the two indicators are aligned in the
..........................
12 o'clock position).
Replace the filter cover.
cleaning and mantanng
your washer 27
WF210AN-02832A
EN.indd
27
2010-02-09
o_,,,f
1:15:10
