Idiomas disponibles
Idiomas disponibles
Spin Only
If you press the Power button and then press and hold the Spin button for 2 seconds, the spin
time is displayed on the display panel.
Then, press the Spin button repeatedly until the required spin level is selected, and then press
the Start/Pause
button.
Before pressing the Spin Only button to use the Spin Only function, you can select a course
with the Cycle Selector. If you have selected a course, you can only select the spin level
corresponding to the selected course.
Garment+_
÷
You can add or take out laundry items even after the wash has started, as long as the
"Garment+ _÷" light is turned on. Pressing the Start/Pause
button unlocks the door, unless the
water is too hot or if there is too much water in your washer. If you are able to unlock the door
and wish to continue the wash cycle, close the door, and then press the Start/Pause
button.
My cycle (WF210*)
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one-button
convenience.
By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The
"My Cycle" Ilight indicates activation.
You can select all options as follows in the My Cycle mode.
1. Select cycles using the Cycle Selector.
2. After cycle selection, set each option.
3_
See page 37 for available option settings with each cycle.
Then, you can store the cycle and options you select by pressing the Start/Pause
button
in the My Cycle mode. The cycle and options you select are displayed the next time you
choose the My Cycle function.
You can change the My Cycle settings by repeating the process above.
The last used setting is displayed the next time you choose the My Cycle function.
If washing is completed in My Cycle mode, the washing machine automatically enters
My Cycle mode when you turn the power on by pressing the Power button.
wash nga oad of aundry
_23
WF210AN-02832A
EN.indd
23
2010-02-09
o_,,,f
1:15:06
