Hitachi Koki NT 65M2S Instrucciones Y Manual De Seguridad página 16

Clavadora de acabado
Ocultar thumbs Ver también para NT 65M2S:
Idiomas disponibles

Idiomas disponibles

English
ADJUSTING AIR PRESSURE
Adjust the air pressure at recommended operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 –
2
8.5 kgf/cm
) according to the length of nails and the hardness of workpiece.
The correct air pressure is the lowest pressure which will do the job. Using the Nailer at a
higher than required air pressure unnecessarily over stresses the Nailer.
LOADING NAILS
● When loading nails into Nailer,
1) do not pull trigger;
2) do not depress push lever; and
3) keep Nailer pointed downward.
(1) Pull the nail feeder back.
(2) Pull the nail feeder until the concave portion of the magazine cover clicks.
16
WARNING
WARNING
Magazine cover
● Do not exceed 120 psi
(8.3 bar 8.5 kgf/cm
Nail feeder
Concave portion
Nail feeder
2
).
loading

Este manual también es adecuado para:

Nt 65m2