Idiomas disponibles
Idiomas disponibles
Caution
1.
Always remove the electrodes from the skin with a moderate
pull in order to avoid injury in the event of highly sensitive skin.
2.
Before
applying
recommended to wash and degrease the skin, and then dry it.
3.
Do not turn on the device when the self-adhesive electrodes
are not positioned on the body.
4.
To remove or move the electrodes, switch off the device or the
appropriate channel first in order to avoid unwanted irritation.
5.
It is recommended that, at minimum, 40x40 mm self-
adhesive square electrodes are used at the treatment area.
6.
Never remove the self-adhesive electrodes from the skin
while the device is still on.
5.4.3 Electrode placement
Tesmed TE-880R PLUS is a kind of OTC stimulator, suitable for
home use. You only have to use according to the user manual,
place the electrode on the position where you feel pain. Conduct
exercise, treatment and adjustment based on your own feeling.
Electrode positioning for TENS programmes
Attention
The electrodes are white in colour with a green logo.
They are shown here with black and red squares that in-
dicate the colour of the pin to which the electrode must
be connected.
The squares
lowing pages always include two electrodes to which
a pair of red and black pins must be connected. Both
cables end with two pairs of pins; each pair is comprised
of a black and a red pin.
It is also possible to use just two electrodes per cable (instead of
four); in this case, connect the two electrodes to one pair of red
and black pins, covering the other pair of red and black pins on
the cable with the dedicated caps provided.
Neck
Tesmed copyright - it is absolutely forbidden the partial or total reproduction of any present content
the
self-adhesive
shown in the illustrations on the fol-
62
electrodes,
it
is
