EQUATION FT40A1 Manual De Instrucciones página 54

EN
Operation
- Switching on is controlled by buttons 1, 2 or 3. Switching off is controlled by button 0.
0- The fan is switched off.
3
2
1- The fan runs at the slowest speed.
1
2- The fan runs at the medium speed.
0
3-The fan runs at the fastest speed.
Activate Oscillation
- Push the oscillation button to make the fan oscillate.
- Pull this oscillation button to stop oscillation.
Angle adjustment
- Turn off the fan.
- Unscrew the tilt screw slightly by turning it anti-clockwise.
- Position the fan at the desired angle and tighten by turning the screw clockwise.
CARE
• Use a soft, dry cloth to clean the surfaces.
• For persistent stains, use a cloth dampened with soapy water and wipe immediately with a dry cloth.
TROUBLE SHOOTING
Malfunctions are often due to minor causes; please read the table below before contacting the after-sales
service. This can save you time and avoid unnecessary expenses.
Problem
The fan does not turn on
TROUBLE SHOOTING
Possible cause
No voltage in the power supply network
Mode switch does not work
Open in the wiring of the fan
Check for voltage at the outlet, check by a specialist
Contact service, check by a specialist electrician
54
Solution