Idiomas disponibles
Idiomas disponibles
In FAN (ventilation) mode it is possible to select the ventilation speed between Low - Mid - High, but it is not
possible to set the Turbo speed.
In AUTO mode (automatic) it is not possible to select the fan speed and set the Turbo speed.
In DRY (dehumidification) mode it is not possible to select the ventilation speed.
7. + - buttons
Press the + or - buttons to set the desired room temperature from 16 °C to 32 °C; the display shows the time and
will change each time the button is pressed. Each time you press "+" the temperature will increase by 1°C and
each time you press "-" the temperature will decrease by 1°C.
Note: Temperature cannot be set in AUTO and FAN mode.
8. MENU / OK button
Press the Menu button to select available functions and display them on the remote control. The remote control
display shows the indications HEALTH, ECO, SLEEP, SILENCE, DISPLAY, LIGHT, IFEEL.
Use the + - buttons, or the L/R SWING or U/D SWING buttons to activate the desired function within the Menu.
After selecting the desired function, press OK to confirm your selection. Each time the + - or L/R SWING - U/D
SWING buttons are pressed, the icon corresponding to the selected function will light up on the display.
9. L/R SWING BUTTON horizontal swing
Shortly press this button to activate the horizontal oscillation of the air delivery flaps. Press this button again to
deactivate the function. Press and hold the button for 3 seconds and press again to fix the flap position.
10. U/D SWING vertical swing
Shortly press this button to activate the vertical oscillation of the air delivery flaps. Press this button again to
deactivate the function.
With the unit turned on, hold down for 3 seconds and then press the button again to set the fixed oscillation angle
between the 4 possible positions. To deactivate this function, press and hold this button for 3 seconds.
Functions that can be activated from the Menu button
HEALTH function
Function not available.
ECO function
With the unit turned on, press the Menu button and using the + or - and U/D SWING or L/R SWING buttons
select the ECO function, pressing OK on the corresponding indication shown on the display. To deactivate this
function, again using the Menu button and the selection buttons, press OK on the ECO indication, which will turn
off. In COOL mode, the unit will activate ECO mode which operates with the lowest electricity consumption and
which automatically turns off after 8 hours. In COOL mode the frequency reduction is linked to the gap between
the room temperature and the set temperature. If you change the mode or turn off the remote control, the ECO
function will automatically be deactivated.
SLEEP function
With the unit turned on, press the Menu button and using the + - and U/D SWING or L/R SWING buttons select
the SLEEP function, pressing OK on the corresponding indication shown on the display. To deactivate this function,
again using the Menu button and the selection buttons, press OK on the SLEEP indication, which will go off.
By pressing the SLEEP button, the display turns off.
After setting the Sleep mode, in the cooling function, the temperature will increase by 1 °C in one hour, then it will
automatically increase by 1 °C again after another hour. After setting the Sleep mode, in the heating function, the
temperature will decrease by 2 °C after one hour, then it will automatically decrease by 2 °C again after another
hour. The fan speed will automatically switch to the lowest level available to guarantee maximum silent operation
during night sleep. After 10 hours of operation in Sleep mode the air conditioner returns to its previous functions
and turns off automatically. This mode cannot be activated in fan and Auto modes.
SILENCE function
With the unit turned on, press the Menu button and using the + - and U/D SWING or L/R SWING buttons
select the SILENCE function, pressing OK on the corresponding indication shown on the display. To deactivate
this function, again using the Menu button and the selection buttons, press OK on the SILENCE indication, which
will go off. This feature allows you to reduce the sound level of the unit for quieter operation. This way the lowest
possible sound level is achieved.
V 11/23
40
