Bralo HT-30 Manual De Instrucciones página 16

BRALO
10. AIR SUPPLY AND PRESSURE REGULATOR
This machine is designed to operate with a compressed air supply.
It is necessary to use an air pressure regulator, this ensures a long service life of the machine and
reduces malfunctions to a minimum.
Make sure that the compressed air supply is dry and clean, as moisture and impurities can cause
malfunctions in the machine.
The air must be FILTERED AND OILED for proper operation of the machine.
Make sure that the maximum hose distance from the pressure regulator to the machine is 3 metres.
Hoses shall have a minimum burst strength equal to 30 bar.
The hose should have a diameter greater than 6 mm and use non-choke connections..
Bleeding
key
Air supply
OPTIONAL: 5 meter hose REF. 05BM3002124
11. INSIDE THE MACHINE
Pressure regulation
and air filtering
Air intake
Traction
piston
www.bralo.com
Pressure
regulator
Lubricater
Closed Drying
key Filtering
EN
3 metres
Air inlet with hose larger than
de más de Ø6 mm
Oil filtering
16
Actuating valve
Pressure
gauge
Hydraulic
outlets