Bralo HT-30 Manual De Instrucciones página 13

• Only kits supplied by BRALO should be used
for the brand rivets.
• Disconnect the air supply before installing or
adjusting the kits.
• When disconnecting the air hose, make sure
that there is no pressure.
• The user must maintain the riveting machine
in a safe working condition and in a clean
working area.
• The machine must be operated at all times
in accordance with current Health and Safety
legislation.
• Take care not to operate the riveting machine
when it is pointed at any person or at the
operator.
• The tool should not be pulled by the hose or
gun but by the power unit, taking the hand off
the trigger to avoid trigger actuation. Keep the
hose away from heat sources or sharp objects.
• Remember that the air pressure must not
exceed 7 bar and the air inlet must not exceed
8 bar.
• Care should be taken not to spill hydraulic oil
and clean up thoroughly with water and alkaline
soap if spilled on the skin.
• Remember to use ISO VG 32 oil for
maintenance work.
9. KITS
KIT
RIVETING KIT INCLUDES: NOSEPIECE
HOLDER, JAW HOLDER
JAWS STRUCTURAL, PUSHER
5HT30R000*
SPRING, WASHER
CLAMP HOLDER CONNECTOR
O-RING
05BM3002021** KIT RIVETING Ø4,8 BRALOCK
05BM3002022** KIT RIVETING Ø6,5 BRALOCK
05BM3002023** KIT RIVETING Ø4,8 UNILOCK
05BM3002024** KIT RIVETING Ø6,5 UNILOCK
* This kit needs to be completed with the corresponding nosepiece.
** These kits require the 3 piece adapter with reference 05HT000A005
NOTE: Optional accessories are required for 4.8 mm rivets.
EN
DESCRIPTION
13
6. STORAGE
For the correct storage of the tool if it is not to be
used for a period of time, consideration should
be given to possible impacts, places with voltage
fluctuations, temperature variations, humidity
and corrosive substances.
7. SPECIFICATIONS
Weight
Gun weight
Dimensions of the
power Unit (mm)
Gun dimensions (mm)
Air pressure (bar)
Maximum power at 6 bar
Stroke (mm)
Hydraulic oil
Oil pressure at 6 bar
Intensification ratio
8. CONTENTS
Inside the packaging you will find the instruction
manual and a bag with the air connection and
the key to open the power unit.
The customer shall purchase the necessary
consumables according to his needs.
ACCESSORIES
NOSEPIECE Ø6,5 STANDARD
NOSEPIECE Ø6,5 HARDLOCK
OR G-BRA
NOSEPIECE Ø6,5 HARDGRIP
NOSEPIECE Ø6,5 STRUCTURAL
ADAPTER
ADAPTER
HT-30
33 Kg
2,2 kg
495 x 395 x 250
260 x 180
6-7 bar
30000N
22 mm
ISO VG 32
300 bar.
www.bralo.com