Idiomas disponibles
Idiomas disponibles
OPERATION
WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for basic felling, limbing, pruning, and woodcutting of lumber
and trees.
INSTALLING/REMOVING THE BATTERY PACK
NOTE: The fuel-gauge circle on the LCD screen indicates the battery-charge level
(Fig. 8). The circle will flash when the battery charge near depletion. Fully charge your
battery pack before first use.
To install battery pack (Fig. 14)
1. Align the ribs of the battery pack
with the mounting slots in the chain
saw's battery port.
2. Slide the battery pack into the
machine until it snaps into position.
WARNING:
latch on the chain saw snaps in place and
the battery pack is secured to the chain saw before beginning the operation. Failure
to securely seat the battery pack could cause the battery pack to fall out, resulting in
serious personal injury.
56-VOLT CORDLESS COMMERCIAL 20" CHAIN SAW — CSX5000/CSX5000-FC
Do not allow familiarity with this product to make you careless.
Always wear safety goggles or safety glasses with side shield
Do not use any attachments or accessories not recommended by the
Make sure that the
14
29
