Idiomas disponibles
Idiomas disponibles
ƒ Turn the On/Off rotary knob as far as it will go to turn off the water supply.
Starting the shower function
EN
You are sitting on the toilet seat or the TECE splash guard is fitted:
ƒ If necessary, turn the "Water quantity" rotary knob slightly:
the shower arm does not yet extend and cooled water may run into the cera-
mics, at the same time the shower arm is rinsed and washed with water (E).
ƒ Now turn the rotary knob fully: The shower arm extends completely and the
washing with water starts (F).
ƒ You can increase or reduce the quantity of water by turning the "Water quan-
tity" rotary knob until you achieve the required result.
ƒ You can set the required water temperature by turning the other rotary knob,
including during operation.
ƒ To turn off the shower function, turn the On/Off rotary knob back as far as it
will go.
Drying
ƒ Close the On/Off rotary knob.
ƒ Dry yourself using a little toilet paper.
ƒ Alternatively, use small, washable hand towels ("soap wipes").
Replacing the shower nozzle heads
Three shower nozzle heads are also included in the scope of delivery (standard
75°). To replace them, proceed as follows:
ƒ Turn the "Water quantity" rotary knob until the shower arm extends a little.
ƒ Pull out the shower arm with your hand and turn off the water supply (G).
ƒ Hold the shower arm firmly with one hand and with the other, pull the head
forwards until it comes off the shower arm (H).
ƒ Now push your chosen shower head– with the opening pointing upwards –
onto the shower arm until it gently locks into position.
As an option, additional shower heads can be ordered which differ in terms of
the intensity and position of the shower jet (see "Spare Parts").
22
