afx light SPOT-240LED-FC Manual De Uso página 10

an added safety measure, be sure to attach at least one properly rated safety cable to the fixture
using one of the safety cable rigging points integrated in the base assembly.
POWER LINK
Connect an IEC cable from the POWER OUT connector of the 1st unit to the POWER IN connector of
the second unit, etc.
CONTROL PANEL (FIG. 2)
To access the main menu press the MENU button. Press the UP or DOWN buttons until you reach
function you wish to change. When you reach the function you wish to change, press the ENTER
button. When a function is selected, use the UP or DOWN buttons to change the function settings.
Once your changes are made, press the ENTER button.
Tip: Press UP & DOWN buttons at the same time for 3 seconds. The display will reverse.
ARTNET FUNCTION
Art-Net uses a network protocol that greatly extends the use of DMX, simplifies cabling by using
RJ45 Ethernet cables and the possibility of using existing networks, HUBs and WIFI.
Art-Net theoretically allows the use of up to 32,768 universes, offering a huge range of possibili-
ties.
Connect an RJ45 cable to the RJ45 connectors on the rear panel, and the other end to your network.
FUNCTION MENU
MENU
DMX address
Channel Mode
DMX Mode
Auto run
Music run
Reset Default
Ethernet Function
Reverse Pan
Option
Reverse Tilt
Select Pan
Select Tilt
Mic sensitivity
OFF signal mode
Fast scan
Totem mode
EN 10
A001-AXXX
23CH
21CH
31CH
Internal pro-
Master/Alone
gram 1-9
Internal pro-
Master/Alone
gram 1-9
Yes/No
ArtNet to DMX (On/Off)
Device IP addr: XXX.XXX.XXX.XXX
Host IP Addr: XXX.XXX.XXX.XXX
Universe: 000
Share signal: (On/Off)
(on/off)
(on/off)
630/540/360
270/180/90
0-99%
(On/Off)
(On/Off)
OFF/CEN./R/L
DESCRIPTION
DMX address setting
23 channel mode
21 channel mode
31 channel mode
Auto mode
Sound controlled mode
Reset to default values
Connect ArtNet to DMX
Setting Device IP address
Setting Host IP address
Setting the Universe Send ArtNet
signal to DMX
Reverse Pan
Reverse Tilt
Select Pan
Select Tilt
Mic sensitivity
Off at original status and ON at
reset status if no DMX signal
Fast scan
Restricts pan & tilt motion
© COPYRIGHT LOTRONIC 2023