Ferroli BlueHelix HiTech RRT H Instrucciones De Uso, Instalación Y Mantenimiento página 320

Opening the front panel
Some internal components of the boiler can reach temperatures high
B
enough to cause severe burns. Before carrying out any operation, wait for
these components to cool or else wear suitable gloves.
To open the boiler casing:
1. Undo the screws "1" (see fig. 42).
2. Pull the panel outwards and lift it.
On this unit, the casing also acts as a sealed chamber. After any operation
B
involving opening the boiler, carefully check the correct refitting of the front
panel and its seal.
Proceed in reverse order to refit the front panel. Make sure it is correctly hooked to the upper fas-
tenings and is correctly positioned at the sides. Once tightened, the head of the screw "1" must
not be under the lower counter fold (see fig. 43).
1
OK
320
BlueHelix HiTech RRT H
fig. 42- Front panel opening
1
fig. 43- Correct position of front panel
cod. 3541V484 - Rev 02 - 01/2024
NO
EN