Hach GS1440 Instrucciones Para El Usuario página 9

4.4 Event list
The event list shows current activities (e.g., configuration changes, alarms, warnings). Previous
events are recorded in the event log, which can be downloaded from the controller. Refer to the
controller documentation for data retrieval options.
A list of possible events is shown in
Power is on.
(or POWER ON EVENT)
The sensor is connected.
(or SENSOR CONNECTED)
The communication is disturbed.
(or COMM CORRUPTED)
The communication response is invalid.
(or COMM INVALID)
Communication time-out
(or COMM TIMEOUT)
Sensor communication was restored
(or SENSOR COMM RESTORED)
Calibration completed
(or CALIBRATION PERFORMED)
Reset calibration
(or CALIBRATION RESET)
A new sensor is connected.
(or NEW SENSOR CONNECTED)
Status
(or STATUS)
Table
3.
Table 3 Event list
Event
Description
The date and time that power to the gateway and
sensor was set to on.
A sensor was connected to the gateway.
The gateway received invalid data from the sensor.
The sensor received invalid data from the gateway.
The response time expired while the gateway waited
for the sensor to reply.
Communication with the sensor was repaired.
A sensor calibration was started.
The Days since last calibration (or DAYS SINCE CAL)
counter was set to 0 days.
A new sensor was connected to the gateway.
The sensor status when the sensor was set to on (or
after a change).
English 9
loading

Este manual también es adecuado para:

Gs2440ex