Idiomas disponibles
Idiomas disponibles
5. Press the "+" or "-" buttons to select the hour you want to set. The selected hour flashes. If you want the heater
to be switched off during the selected hour, press the "Standby" button (Figure 13) and the selected hour will not
be displayed, the heater is then set not to operate during that time. If you want the selected time bar to operate for
that hour, simply press the mode in which you want the time bar to operate, either Comfort (double bar), Economy
(single top bar) or Anti-freeze (single bottom bar) and the corresponding symbol will be displayed for that hour,
the appliance will then operate in that mode for the programmed hour. Repeat the process for each hour until you
have fully programmed your preferred settings.
6. When all the Monday time bars have been programmed, press the "PROG" button to move on to the next day,
Tuesday (2). Repeat all these steps to programme each day of the week, until you reach Sunday (7). When
Sunday is programmed, press the "PROG" button to confirm the settings, press the "PROG" button again to
display the current day according to your settings, the current hour will flash.
IMPORTANT: If you wish to change the temperatures previously assigned to each operating mode, follow the
steps on page 12 of these instructions.
EXAMPLE PROGRAM:
• The current scheduled day. (1 for Monday).
• The approximate room temperature (Example 21.6。C).
• The current time bar flashes (18:00 - 19:00) on the hour.
• The mode programmed in each time bar:
Comfort Mode (Sun Symbol) 18:00-23:59hrs.
Economy mode (Half-moon symbol) 19:00 & 23:59-08:00.
Switched off between 10:00-16:00.
• The heating element is on
Note: If this symbol is not displayed, the heater does not consume energy .
IMPORTANT: Pressing the "PROG" button switches from manual mode to automatic (programmed) mode.
Note: After two or three months of operation, the clock generally needs to be adjusted.
.
