Idiomas disponibles
Idiomas disponibles
Automatic use (programmed)
The heating system allows you to create an individual programme to suit your personal needs. This programme is
set according to the day, time and operating modes: comfort, economy, anti-freeze or standby mode.
1. If the appliance is in standby mode (Fig.19), press the "Standby" button (Fig 13) to switch it on.
2. Press the "PROG" button for three seconds. The four digits of the clock are displayed. The two hour digits flash
first. Use the (+) or (-) buttons to enter the current time. Then press "PROG" to set the minutes. Enter the current
minutes. Press the "PROG" button.
3. Next, set the current day of the week. The following numbers are displayed: "1,-,-,-,-,-", 1 meaning Monday.
Use the (+) or (-) buttons to enter the day of the week you want to program as follows (1 = Monday, 2 = Tuesday,
etc.), once the day is selected, press the "PROG" button.
4. Scheduling each day of the week. Start by scheduling the first bar for Monday
(1) For example, from 00:00 to 01:00 (the first double bar flashes), there are 24 double bars, one double bar for
each hour.
An operating mode can be assigned to each hour:
• To program comfort, press the "Comfort" button: (Comfort mode = a double bar and the "Comfort" symbol).
• To program the economy, press the "Economy button (Economy mode = a single upper bar and the "Economy"
symbol).
• To program anti-freeze, press the "Anti-freeze" button. (Anti-freeze mode = a single lower bar and the "Anti-
freeze" symbol).
• To program "Standby - switch off", press the "Stand-by" button. (Standby mode = no bars".)
The programming is done hour by hour. The selected hour flashes.
