Idiomas disponibles
Idiomas disponibles
Operating instructions
1. Once the appliance is installed and connected to the mains, press the ON/OFF switch, located at the bottom right of
the appliance.
2. The LCD screen lights up and all the symbols flash several times.
3. The operating mode just before the last switch-off is then displayed (stand-by (Fig 15), manual (Fig 16) or automatic
(Fig 17)), together with the approximate room temperature.
4. In "Standby" mode (Fig. 15), press the "Standby" button to turn on the radiator (Figure 13). The radiator lights up and
the symbol for the last operating mode selected appears on the display. In addition, the approximate room temperature
is displayed.
If the radiator is switched on in manual mode (Fig. 16) or automatic (Fig. 17), the device is in operation.
Lock/Unlock
The appliance controls lock automatically if no button is pressed for 60 seconds, to ensure child safety. This
operation is performed in both manual and automatic mode. The appliance controls can be unlocked by pressing
the "+" and "-" buttons on the control panel simultaneously for three seconds (Figure 13) or on the remote control
by pressing the "+" or "-" buttons separately.
Note: After unlocking the keyboard, the selected temperature appears for three seconds with 。C flashing
Using the radiator
The radiator can be operated in manual or automatic (programmed) mode.
Manual use
To select manual mode, press the "PROG" button until the time bars disappear from the LCD screen (Figure 18).
In manual mode, the desired heating mode can be selected (comfort, economy or antifreeze) by pressing the
corresponding button (Fig. 13) and the radiator will continuously operate in one of these modes with the
programmed temperatures.
Changing the selected temperature
The appliance is pre-set with a temperature for each operating mode, which can be changed as follows:
