MR TAPCON 230 Manual página 43

3. Connect the PC and the device via the front interface using an Ethernet cable
(RJ45 plug).
Figure 42: Establishing a connection via the front interface
4. Assign a unique IP address to the PC in the same subnet as the device (e.g.
192.168.165.100).
5. Enter the visualization's IP address http://192.168.165.1, or if SSL en-
cryption is active, enter https://192.168.165.1 in the browser on the
PC.
The visualization is accessed.
Establishing a connection via the rear CPU-X3 interface
1. Connect the PC and device via the rear CPU-X3 interface using the preassem-
bled patch cable.
2. Go to Communication on the device to display the device's IP address.
3. Assign a unique IP address to the PC in the same subnet as the device (e.g.
192.0.1.100).
4. Enter the visualization's IP address (e.g. http://192.0.1.230; if SSL en-
cryption is active enter https://192.0.1.230) in the browser on the PC.
The visualization is accessed.
6.2 Setting the language
English
German
French
Spanish
Korean
Table 5: Available display languages
1. Press the
2. Select the desired language from the list field.
3. Press the Accept button to adopt the parameter.
The "Restart device" dialog is displayed.
4. Restart the device to apply the changed language setting.
Italian
Portuguese
Russian
Chinese
Polish
button in the status bar.
7820658/06 EN Initial steps
43