MR TAPCON 230 Manual página 40

40
Mounting 7820658/06 EN
5.4.12.3 Connecting the device grounding to the housing (optional)
If you have installed the device in a housing, ground the device as follows:
The swing frame is open.
1. Guide a grounding cable through a cable gland.
2. Loosen the grounding screw on the housing and connect the grounding ca-
ble to the neutral point provided in the housing.
Figure 39: Grounding the housing
3. Affix the housing grounding cable to the device grounding screw. If neces-
sary, affix the grounding cable protective conductor to the grounding screw
as well.
Figure 40: Affixing the housing grounding cable and protective conductor to the device