Installing The Non-Return Valve - Klarstein CONTEMPO Manual De Instrucciones

EN
34
Cleaning the metal filter
It is recommended to clean the metal filter every three months as follows:
• Remove the metal filter from the hood and wash it in a solution of water and
neutral liquid detergent, then allow it to soak.
• Rinse thoroughly with warm water and allow to dry.
• The metal filter may change colour after several washes. This is not a reason
for a complaint or for replacing the metal filter.

INSTALLING THE NON-RETURN VALVE

Hold the non-return valve with your
hands and align it with the recesses.
Insert the non-return valve and then
turn it until it is secure. The type
of mounting for external air ducts
and the check valve must meet the
requirements of the IEC/EN 60335-1
standard.