Replacing The Lamp; Cleaning And Care - Klarstein CONTEMPO Manual De Instrucciones

REPLACING THE LAMP

1. Turn off the power by unplugging the power cord or turning off the fuse.
2. Remove the grease filter.
3. Remove the lamp by prying its holder out of the hood (this may require
pressure).
4. Unplug the light.
5. Replace the light with a new light of the same type, making sure to connect
the light to the light cable correctly.
6. Turn the power back on by plugging in the power plug or turning on the fuse.
Max.
Voltage
power
1.5 W 220-240 V

CLEANING AND CARE

• Unplug the hood before cleaning or servicing.
• Clean the surface of the hood frequently. Use mild soap or detergent to clean
the hood.
• Do not use aggressive cleaning agents or abrasive cleaners.
• Avoid using dishwashing detergents.
• The grease filter can be washed with a mild soap or detergent. (Heavy grease
deposits may not be easy to clean and the filter may need to be replaced).
• The activated carbon filter cannot be cleaned and must be replaced regularly.
• The cleaning water must not penetrate the electrical parts such as the
motor or control switch!
Dimensions: 33.2 mm x 120 mm
ILCOS D
Code
DSH-1.5-
S-33.2/120
EN
33