Idiomas disponibles
Idiomas disponibles
EN
•
Installation work and electrical wiring
must be carried out by qualified
persons in accordance with all
applicable regulations and standards,
including the design of the equipment.
•
Do not exhaust air into a flue from
other appliances that burn gas or other
fuels.
•
The regulations regarding exhaust air
flow must be met.
•
The extractor hood must be installed
at a minimum distance of 65 cm above
the cooking surface of a hob.
•
The extractor hood must be installed
at a maximum distance of 75 cm above
the cooking surface of a hob.
30
Installation in the cupboard
•
Drill one 130 mm diameter hole and four 3.5 mm diameter holes as shown
below.
ATTENTION: If your extractor hood is running in recirculation mode, it is
•
not necessary to drill a 130 mm diameter hole.
•
Use the 4 screws to attach the cooker hood to a kitchen cabinet. Check that
the screws are correctly seated by temporarily securing the cooker hood. Once
properly installed, attach the hood and tighten the screws if necessary.
