GE 25 Serie Manual Del Propietario Y Instalación página 18

Removing endreplacingthedoors.
When installing or moving the refrigerator, the doors may need to be removed in order to fit the refrigerator
through a doorway.
Removing the Doors
Make sure the doors are closed and the refrigerator is
unplugged.
0 Disconnectwater lineand wiringharness.
Near the lower hinge on the fleezer side, push in on the
('ollm's at ea(h end of the (oupling, and pull tile water
line nlbing flom the coupling. Also, disconnect _dring
harness. Pull the water line and the harness through tile
lower rail.
Removethehingecovers and the hinges.
In order to access tile hinges, the hinge covers need to be
rem()ved. Rem_)ve the o)ver by grasping it on tile sides,
near the back of the cover, l'ush back on the cover and
lift up at the back, then the fiont.
NOTE: DONOTusea screwdriver t oremove thecoverBECAREFUL
not tobreaktherearretainingtabon thehingecoverRemove the
hlhgesusinga Torx T-20.
Removethedoors.
Cmeflflly rotate the door to 90 ? Guiding the disconnected
water line and wiring harness, lift tile door smdght up.
NOTE: Not riftingthedoorstrelghtupmaydamage thebottomhlbge.
P/ace doorson a protected surface.
NOTE: Becarefulnot topinchthewater tubingandthewireharness
at thebottomof thedoor
NOTE:Donotallow theconnector t ocontactthefloor Hardcontact
candamage theconnectorSee"Replacing t heDoors."
Replacing the Doors
Place doom onbottomhinges.
With the door at 90 ° lower tile door straight down onto
the bottom hinge. Carefiflly (h)se the door.
O
@
NOTE: Not loweringthedoor stretghtdownontothebottomhlbge
maydamage thehinge.
NOTE:Donotallow theconnector t ocontactthefloor Hardcontact
candamage theconnector
Replacetophingesand hingecovers.
Reinstall the top hinges using a Torx T-20. Replace the
hinge (°vers" If tim deers are n°t level' adjust the b°tt°m
right hinge wifll a 7/16" open ended x_Tench.
Reconnect water line and wiring harness.
Insert water robing ba(k into (oupling, making sure tile
robing is pushed flu enough into tile coupling so fllat you
no hmger see the mark on the robing. Reconnect the
wiring harness.
Turn on the watersupplyandplug therefrigerator back in.
_ Hinge Cover
I ' j Door
_-_l Hinge Pin
C011nect0r
/8