Idiomas disponibles
Idiomas disponibles
please choose a lower power "II" or "I" position to reduce energy
consumption and prevent the room from overheating.
Note
When using the appliance for the first time or reconnecting the power
cable, please check that the plug is securely inserted in the socket.
Temperature adjustment
• If during use you feel the room temperature is too hot, you can use
the following adjustment modes:
• Turn the power switch to position "II" or "I".
• Turn the thermostat knob counterclockwise by a certain angle. The
closer to the " - " position, the lower the set temperature.
Stop
• Turn the power switch to the "0" position, and then pull the power
plug.
Moving the heater
• To move the heater, turn first turn it off, and pull out the power plug;
then move it to the desired location by rolling it on its wheels.
2.3. Maintenance
• The electric heater should be cleaned regularly to wipe off any dust
on the fins, as this may hinder the radiating efficiency.
• Disconnect the appliance from the power supply and allow the
radiator to cool down before wiping and dusting it with a soft damp
cloth. Do not use detergents or abrasives.
• Do not scrap the fins surface with sharp hard tools, in order to avoid
the surfaces becoming rusty, due to damage to the paint coat.
3. POST-SALE SERVICE
Becken has designed this appliance in order to guarantee maximum
reliability. However, if a problem occurs do not attempt to open the
appliance - there is a risk of electrical shock. If you are not able to solve
Oil Heater | Radiator de Aceite | Irradiador a Óleo
EN
9
