Sony KP-48V75 Manual De Instrucciones página 24

4 Press ¢ or # to move the cursor (>) to the
symbol showing the line you want to
adjust, and press - .
Setting cable TV on or off
If you have connected the projection TV to a cable TV
CONVERGENCE system, set CABLE to ON (the factory setting). If not,
set CABLE to OFF.
You do not have to do this procedure if you perform
AUTO SET UP (page 21). Do this procedure only when
you want to set it manually.
Use GOQHRIAY Exit Kl
+RED: Red vertical and horizontal line (left/right/up/ 1 Press MENU.
: down adjustment)
+BLUE : Blue vertical and horizontal line (left/right /up/ 2 Press ¢ or # to select =, and press (2)
down adjustment)
3 Set CABLE to ON or OFF:
(1) Press # or # to move the cursor (») to CABLE,
and press @ ) .
(2) Press # or # to select ON or OFF, and press G>.
5 press ¢, ¢, #, or + to move the line until it
converges with the center green line, and
press %
CONVERGENCE
SET UP
CHANNEL ERA
L GAP
ANNEL BLOCK
[@ pEAYORITE CHANNEL
CABLE:
SE/ADD
AUTO PROGRAM
VIDEO LABEL
LANGUAGE : ENGLISH
CONVERGENCE
Exit &)
4 Press MENU to return to the original screen.
To move Press
U
Down : Note
oh ¢ If CABLE appears in gray, the projection TV is set to a video
se : ua input and you cannot select CABLE. Press ANT so that a
Left : _+
channel number appears.
6 Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7 Press MENU to return to the original screen.
24-EN | Getting Started