Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cautions:
e We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
+ When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and
fingers.
First complete the electrical connections, and
then check them for correctness.(=> Page 28)
The included Mounting Collar
(D is designed specially for this
unit. Do not use if to attach any
other model.
Insert Mounting Collar @ into the
dashboard, and bend the mounting
tabs out with a screwdriver.
The tabs to be bent vary depending on the
car. To securely install the unit, fully bend
a number of the tabs so that there is no
rattling.
Example: à
(O Mounting
Collar
Mounting Holes
(5) Mounting Bolt
Establish the rear connection of the unit.
After fixing Mounting Bolt © and Power Connector ©,
fix the rear of the unit to the car body by either method
(a) or (b) shown below.
Insert Trim Plate $).
After installation re- Aro
a) connect the negative
(-) battery terminal.
5
(b) Using the rubber cushion (option)
Engage the Mounting
Springs (3%) in the
mounting holes of
the Mounting Collar
O firmly.
Mounting
(a) Using the rear support strap ©
Fire wall of car
Rear support bracket
@Tapping screw
(provided on the car)
(5 mmex16 mm)
- Rubber cushion (option)
(DHex. nut
(5 mme)
©) Mounting bolt
{5 mma)
C0-R233U
(3) Rear support strap
©) Mounting bolt (5 mma}
(D Mounting collar
25
Tabla de contenido
