Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ee
CQ-R253U
Installation Guide
LN WARNING
This installation information is designed for experienced installers and is not
intended for non-technical individuals. lt does not contain warnings or cautions of
potential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than qualified
installer could cause damage to the electrical system and could result in serious
personal injury or death.
J installation Hardware
o| tem [pen [or
gl Mounting collar
IE
Tapping screw
(5 mma x 16 mm)
g Mounting bolt (5 mma)
Dismounting plate
Pain
Q Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through the
remaining steps:
(Please refer to the "WARNING" statement above.)
Hex. nut (5 mm)
* Identify and label the car wires.
e Connect the car wires to the wires of the power
connector.
* Install the unit in the dashboard.
s Check the operation of the unit.
If you encounter problems, please consult your nearest
professional installer.
Caution:
* This unit operates with a 12 V DC negative ground
auto battery system only. Do not attempt to use it
in any other system. Doing so couid cause
serious damage.
Before you begin installation, look for the items which
are packed with your unit.
e Warranty Card...Fill this out promptly.
+ Panasonic Servicenter List for Service Directory
...Keep for future reference in case the product
needs servicing.
«Installation
Hardware...Needed
for in-dash
installation.
Q Required Tools
You'll need a screwdriver, a 1.5 V AA battery, and the
following:
12 V DC
Eiectrical tape
Side-cut
Test buib
pliers
Ñ e ==
Tabla de contenido
