Idiomas disponibles
Idiomas disponibles
Cassette Tape Player
Loading a Cassette
Insert the cassette with the exposed tape side facing to
the right. Gently push the cassette in until the loading
- begins. The cassette will be loaded in place and playback
starts.
14
Program Indicator
(This indication """ rotates.}
Exposed Tape end
Caution: Do not insert a tape when "tape"
indicator "A" or "Y" lights.
Note: To maintain your cassette player in top
condition, avoid using tapes that are longer than 90
minutes (C-90).
Notes on Cassette Tapes
Tape Slack:
Use a pencil or similar object to take up the slack as
shown. If a loose tape is used, this may result in the
tape becoming tangled in the rotating parts of the
unit.
Pencil
Exposed end
(Open end)
Do not touch
or pull out the
tape.
Ejecting the Tape
Press [44} and the cassette will eject for removal, and
the previous mode of operation will be resumed.
Notes:
e If power is switched off before [4] is pressed, the
cassette will not eject. Switch on the power again and
press [44] to eject the cassette.
e The cassette tape should always be removed from the
cassette slot when not in use.
Play Side Change
Press [<>] to switch to the program on the other side
of the tape.
The display changes to indicate which program is
playing.
Top Side Playing
Bottom Side Playing
Rewind and Fast Forward
Pressor [kta TRACK] to (> TRACK] activate rewind
or fast forward of the tape.
blinks
Press [<4] to stop rewind or fast forward.
If you rewind the tape fully, it will play on the same
program side again.
if you fast forward to the end, play will resume from the
beginning of the other side of the tape.
