urmet domus 1038/62 Manual Del Usuario página 8

1
10
2
3
9
4
8
5
6
7
The digitiser consists of the following parts:
1) Main casing made of plastic.
2) Speaker volume trimmer.
3) System connection terminal board (MP1, MP2,
MS).
4) Microphone volume trimmer.
) Terminal board for connecting the eight basic
buttons.
6) Terminal board for local (MA) and video signal
(MV) auxiliary services.
7) Connector for terminal Ref.1038/ programming.
8) Connector for 16 user expansion modules
Ref.1038/17.
9) Electric lock connection terminal board (M-ES).
10) Adhesive labels indicating device data, serial
number and terminal board connections.
14
DESCRIPTION OF THE TERMINAL
BOARDS
MP1 - Voice 1 main terminal board
V Power positive ( 24V)
0V Power earth and data line
D Data line
A1 Voice wire 1 (out)
1 Voice wire 1 (back)
MP - Voice main terminal board
A2 Voice wire 2 (out)
2 Voice wire 2 (back)
Voice power positive ( 33V)
0 Voice earth
MS - Secondar terminal board
V Power positive ( 24V)
0V Power earth and data line
D Data line
A Voice wire (out)
Voice wire (back)
MA - A iliar terminal board
0V eys/contacts/buttons common
P all door opener button input
P Postal key contact input
SP Door sensor input
MV - Video terminal board
V Video relay box power Ref. 1038/68
SC Video relay energising output Ref.1038/68 -
riser
S Video relay energising output Ref.1038/68 -
local
S12 Video relay energising output Ref.1038/68 -
channels 1/2
S1 Video relay energising output Ref. 1032/9 for
channel 1
S2 Video relay energising output Ref. 1032/9 for
channel 2
0V Relay device earth Ref. 1032/68
MT - B tton terminal board
1 asic button 1
2 asic button 2
3 asic button 3
4 asic button 4
asic button
6 asic button 6
7 asic button 7
8 asic button 8
0V utton common
M-ES - Electrical loc terminal board
C ormally closed contact
C Common
ormally open contact
DS1038-013
SPECIFICATIONS
ntake in terms of unitary loads: L
(including expansion
modules 1038/17, where tted)
ogic circuits
ogic power voltage ( V/0V) : 1 - Vdc
Stand-by intake: ~30 mA
Calling intake: ~ 0 mA
Voice on intake: ~ 0 mA
ntake of timed lock circuit only: ~ 0 mA
Voice circuits
Voice power voltage ( /0 ): 30 - 3 Vdc
Stand-by intake: ~1 mA
Voice on intake: ~ mA
Relay energising output:
NC-C-NO - Ma 30Vac dc A
perating temperature range: rom -10 to
DS1038-013
OPERATION
CALLS
p to 104 users can be called by pressing the
corresponding buttons on the pushbutton panels
connected to the digitiser Ref.1038/62. urthermore,
a Concierge switchboard 1038/40 (where
can be called simply by pressing the calling
button associated to the concierge switchboard
programming code.
The apartment station will ring with a continuous
tone (main digitiser) or intermittent tone (secondary
digitiser) for the programmed time (from 1 to
seconds). Three con rmation beeps will be heard
when the call is forwarded. Press the call button
again to extend the ringer time.
CALL CODES ASSI NED TO B TTONS
0 C A numeric or alphanumeric code in the range from
(0000) to ( ) can be assigned to the call buttons.
These codes identify the door phone or video door
phone apartment station which will be called when
the button is pressed. Concierge switchboard calling
codes can be assigned to the buttons.
tted)
1