Service; Troubleshooting Overview - THERMEx AIRSLIM Instrucciones De Uso

38
THERMEX AIRSLIM

SERVICE

It is important that you read the installation and/or user instructions carefully before reporting your Thermex hood to the service department. This
ensures that Thermex can provide you with the best possible assistance.
The service department at Thermex can be contacted regarding:
• Getting technical support for mounting and installing your hood.
• Explaining the functionalities of your hood.
• Service requests while your hood is under warranty.
Always try to disconnect the power supply to the hood for approx. 5 minutes. Reconnect the power to see if the problem has been solved.
If this does not solve the problem, disconnect the power supply to the hood for one hour. If the hood is still not working properly, even though you have
consulted the troubleshooting section for help, contact the service department.
NOTE: When making inquiries regarding your warranty, you will be asked for proof of your purchase in the form of a sales receipt. You should therefore
always save your sales receipt.
It is important to have all the necessary information ready before contacting us regarding service requests while your product is under warranty:
• Description of error
• Model
• Type of hood and serial number (indicated on the chassis plate)
• Purchase information
You can fill out the service form at www.thermex.dk/service for making service requests while your product is under warranty. You can also read the
terms of service here.
Inquiries regarding technical support or an explanation of the functionalities of your product can be made by sending your inquiry to service@thermex.
dk or by telephoning +45 9892 6233.

TROUBLESHOOTING OVERVIEW

PROBLEM
The hood is not working.
Air extraction of the hood is not
sufficient.
POSSIBLE CAUSE
The hood is not connected to the power supply.
The filters are dirty or blocked.
Forced operation is not adjusted correctly in rela-
tion to the ventilation system.
SOLUTION
Check that the hood is connected to the power supply.
Disconnect the power for approximately 5 minutes and
connect again to check if the fault is still there.
Check to see if the filters are clean and if necessary, clean
them according to the section on cleaning and mainte-
nance in this manual.
A hood for central ventilation or heat recovery systems
must always be adjusted to the individual system. Con-
tact a ventilation company for correct adjustment of the
vent.
B 530991001205122017