Carrera RC Nintendo RC Mini Instrucciones De Montaje página 9

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Charging the rechargeable battery via computer
Make sure you only charge the LiPo rechargeable battery sup-
2
plied with the LiPo charging unit also supplied (USB cable). In
case you try to charge the rechargeable battery with a different LiPo
battery charger or any other battery charger, this might cause serious
damages. Please carefully read the previous chapter about warnings
and guidelines on the usage of rechargeable batteries before pro-
ceeding. The rechargeable battery fitted in the car with its USB
charging cable can be charged from a USB port on a computer:
• Connect the USB charging cable with the USB port of a computer.
The LED on the USB charger cable lights green indicating that the
charger unit is correctly connected to the computer. If you plug in
a car with a discharged battery, the LED on the USB charging
cable lights up red and shows that the car battery is being
charged. The USB charging cable and the charging socket on the
car are designed to make incorrect connection impossible.
• It takes about 30 minutes to recharge a discharged battery (but
NOT a deep-discharged one). When the battery is fully charged,
the LED display in the USB charging cable lights up green again.
Note: When supplied, the lipo-battery is already partially
charged so the first charging cycle may well take less time.
It is essential to follow the connection sequence given above! If
you have the charger cable only connected to the car, and not to
a source of electricity, a green LED display indicates that there
is still power in the battery. The green LED display does not
necessarily indicate the battery is still adequately charged.
While charging, the power switch must be in the "OFF" position.
ENGLISH
Open the battery compartment with a screwdriver and insert the
3
batteries in the remote control. Ensure the polarity is correct.
1. Switch the car ON at the ON/OFF switch. The LED of the
4
car will flash rhythmically.
2. Switch on the controller. The LED on top of the controller
5
will flash rhythmically. After a few seconds, the LEDs on the
car and on the controller will light continuously, meaning the
bind has been made.
• Avoid constant motor operation.
• If the car switches itself off several times one after another, the
battery is dead. Please recharge the battery.
• Clean the Carrera RC car after use.
Controller functions – Full Function
You can steer the car in any direction using the joysticks:
6
Joystick on left: forwards/backwards
Joystick on right: left/right
Troubleshooting
The vehicle does not work
• Position the switches on the transmitter and vehicle to "ON".
• Have the batteries/power packs been inserted correctly?
• Are the battery contacts bent or dirty?
• Are the batteries discharged or defective?
• Are the vehicle and the transmitter/controller connected properly
(see
4 5
)?
9

Hide quick links:

Tabla de contenido
loading

Tabla de contenido