4 – Directional switch (piston pusher up / down switch – working together with foot switch)
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
Disassemble the device and all its components and clean them before the first use.
3.3.
Device use
Place the foot switch in a dry place.
Connect the electrical supply.
Make sure the speed control knob is set to the lowest speed.
EN
1 – Speed adjustment knob
2 – RUN/STOP switch
3 – Power switch
5 – Foot switch cable
6 – Power cord
7 – Reset button