Idiomas disponibles
Idiomas disponibles
EN
Note: "00" is the darkest, and "03" is the brightest.
5. Press the parameter setting button to save the new
brightness level.
6. Press and hold the parameter setting button for
more than two seconds to exit.
5.3
UNIT CONVERSION SETTINGS
1. Press and hold both the plus and minus buttons for
more than two seconds to enter the custom setting
interface.
2. Press the plus button to enter the selection interface
of "02P".
3. Press the parameter setting button to enter
parameter modification area (located at the bottom
of the display).
English (Original Instructions)
4. Press the plus/minus button to select desired unit
preference.
Note:
"00": metric system (km/h)
"01": imperial system (mile/h)
5. Press the parameter setting button to save the new
unit preference.
6. Press and hold the parameter setting button for
more than two seconds to exit.
5.4
TRIP DISTANCE RESET
The display can record single trip mileage and total
mileage. It is able to clear the single trip mileage, but
not able to clear total mileage.
1. Press and hold both the parameter setting button
and minus button for more than two seconds to
reset the trip distance.
5.5
FACTORY RESET
1. Press and hold both the plus and headlight buttons
for more than two seconds to enter the factory reset
interface.
18
