Idiomas disponibles
Idiomas disponibles
EN
4.1.7 CONNECT THE BATTERY TO THE
PRODUCT
Ensure the battery is fully charged before operating.
1. To remove the cover, insert the key and rotate it
clockwise to the UNLOCK position.
2. Push the battery into the battery compartment. The
battery locks into position when you hear a click.
IF THE BATTERY DOES NOT FIT EASILY INTO
THE BATTERY HOLDER, IT MAY NOT BE
INSTALLED CORRECTLY, WHICH CAN CAUSE
DAMAGE TO THE BATTERY AND/OR THE
PRODUCT.
3. Rotate the key to the UNLOCK position and hold it
in place. Align the cover with the battery box and
push it firmly along the ribs until it locks into place.
4. Withdraw the key to remove it from the lock. Always
make sure the battery cover is securely in position
before riding the bike.
English (Original Instructions)
CAUTION
4.2
START THE PRODUCT
1. Press and hold the on/off button to power on.
2. Activate the product by squeezing the brake lever.
3. Select the riding assist level by pressing the PAS
adjust button (+/-).
Note: The default gear is 0, and you can choose
a level from 1 to 3. A higher gear provides faster
acceleration.
14
