OHAUS Endeavor 5000 Serie Manual página 17

Endeavor 5000 Series
2 OPERATION
2.1. Getting Ready
1. Connect the provided power supply to the unit.
2. Plug the female end of the provided power cord into the power supply and plug the male end of the power
cord into a matching standard grounded outlet.
3. Toggle the power switch to the ON ( • ) position.
4. Allow unit to complete the start-up sequence:
a. LCD Test – all display icons illuminate
b. Model Type, software version
c. Function Units
Timer [Hours : Minutes], Shake Speed [RPM]
5. The main operating screen will return, and the previous timer and shaker settings will be displayed.
2.2. Idle Mode
Timer
1. By default, the timer will be set to 00:00 and count upwards when the shaking function is turned on.
a. The timer begins in MM:SS mode
b. Once the timer reaches 59:59 it will automatically switch to HH:MM mode at 01:00.
2. When the timer is set to any time between 00:01 and 99:59, the timer will count downwards from the set time
once the shaking function is turned on and the Timer Status indicator Light (B) will be illuminated.
a. The timer can only be set in HH:MM mode.
b. Once the timer reaches 01:00 in HH:MM mode, it will automatically switch to MM:SS mode at 59:59.
c. Once the timer reaches 00:00 in the countdown mode shaking functions will shut off, the unit will beep 1
time and "End" will appear on the display (A, Figure 1).
Adjust Timer
1. Rotate the Time Adjustment Knob (D, Figure 1).
a. The minutes will blink on the display.
b. Rotate the knob to adjust the minutes value
c. Quick press the Time Adjustment Knob (D) to select the minutes value
d. The hours will now blink on the display.
e. Rotate the Time Adjustment Knob (D) to adjust the hours value
f. Quick press the Time Adjustment Knob (D) to confirm hours value and the timer setting
EN-15