Idiomas disponibles
Idiomas disponibles
(1) Turn the hook away from the saw body to hang the
saw from a rafter, joist or other elevated support.
(Fig. 18)
WARNING
To reduce the risk of injury, do not use the saw
with the hook hasn't returned to the initial
position.
(2) When not in use, return the hook back to the storage
position until it latches against the saw body.
ADJUSTSING THE SAW PRIOR TO USE
WARNING
To avoid serious accidents, ensure the switch is
in the OFF position, and pull out the battery.
1. Adjusting the cutting depth (Fig. 19)
Loosen
Cutting depth lever
Hook
Fig. 18
Base
Tighten
Link
Fig. 19
WARNING
If the cutting depth lever is loose, injury can
result. Tighten it securely after adjustment.
To adjust cutting depth, loosen the cutting depth lever
and, while holding the base with one hand, move the main
body up and down to obtain the prescribed cutting depth.
After adjusting to the prescribed cutting depth, tighten the
cutting depth lever securely.
2. Adjusting the angle of inclination
WARNING
If the incline lever is loose, injury can result.
Tighten it securely after adjustment.
You can incline saw blade from 0˚ to a maximum angle of
55˚ in relation to the base.
As shown in Fig. 20 by loosing the incline lever on the
bevel scale, the saw blade may be inclined to an angle of
45˚ in relation to the base.
If you use inclination angle of over 45˚, as shown in Fig. 21
move the incline lever to outside, the saw blade may be
inclined to a maximum angle of 55˚ in relation to the base.
Always ensure that the incline lever is thoroughly
tightened after making the desired adjustment.
Incline lever
0˚–45˚
English
Loosen
Tighten
Fig. 20
21
