Gima SPOT-CHECK PC-300 Guía De Uso página 83

83
ENGLISH
5. Turn on the Spot-Check Monitor. Press the menu button to go to the settings. Press and
hold the large NIBP measurement button to enter the Pressure Check Mode.
6. Start pumping, and check if the pressure reading on the Spot-Check Monitor matches
the mercury pressure reading.
M3x6 Screw NIBP Connector Plug Air tube NIBP Connector
Figura 2.11 Figura 2.12 Figura 2.13
NIBP Port
Figura 2.15
Figura 2.14