Blood Glucose Measurement (Optional) - Gima SPOT-CHECK PC-300 Guía De Uso

75
Safety Instruction for Temperature Measurement
 Do NOT take measurement when the subject is moving.
 The patient with tympanitis and otitis problem should NOT use this device for measuring.
 When the infrared temperature probe is connected to the device, the infrared temperature
probe will be always at power-on status, so pressing the power on/off key on the
temperature probe will not take effect.

2.3.4 Blood Glucose Measurement (Optional)

Using the optional link cable for the On Call Plus Blood Glucose Meter,
connect the Glucose Meter to the connector on the right side
of the Spot-Check Monitor marked "GLU" (
Appearance and key functions of the On Call Plus Blood Glucose:
1. Test strip: the strip with chemical reagent attachment used
for the meter to measure glucose concentration in blood.
2. Test strip slot: a test strip is inserted into the slot to perform a test.
3. LCD display: display the test result and help you go through
the testing process.
4. M key: recall previous test results from the meter memory
and performs other menu selection functions.
5. S key: select meter setting, perform other menu selection
functions. Please refer to the User Manual of "On Call Plus Blood
Glucose Monitoring System" for detailed function descriptions.
6. Data interface: used to connect to the Spot-Check
Monitor for data transmitting.
ENGLISH
).
Figure 2.8 Appearance of the
On Call Plus Glucose Meter