Gima SPOT-CHECK PC-300 Guía De Uso página 76

Operations for the Lancing Device and Blood Lancet
Cocking barrel
Release button
1. Unscrew the lancing device cover from the body of the lancing device. Insert a sterile
lancet into the lancet holder and push it until the lancet comes to a complete stop in the
lancet holder.
2. Hold the lancet firmly in the lancet holder and twist the safety tab of the lancet until it
loosens, then pull the safety tab off the lancet. Save the safety tab for lancet disposal.
3. Carefully screw the cover back onto the lancing device. Avoid contact with the exposed
needle. Make sure the cover is fully sealed on the lancing device.
4. Adjust the puncture depth by rotating the lancing device cover. There are five puncture
depth settings.
5. Pull the cocking barrel back to set the lancing device. You may hear a click. The device
is now ready for obtaining a drop of blood.
Refer to figure 2.9A.
ENGLISH
Lancet holder
Safety tab
Sterile lancet
Puncture depth
settings
Cocking barrel
Lancing device cover
76