Idiomas disponibles
Idiomas disponibles
10.1 Check the rear brake disc
Figure 28 Inspection of rear brake disc
Brake disc wear limit
front
3mm
rear
3mm
Warning:
The wear of the brake disc will reduce the thickness of the brake disc within the contact surface of the brake friction
lining, which will reduce the braking effect and threaten your driving safety. Once damage, cracks, or deformation
occur, please replace the brake disc immediately.
When the brake disc is worn to the limit thickness of 3mm, it must be replaced; remove the rear brake caliper and
rear wheel, and then replace the brake disc.
The brake disc will gradually wear out during long-term use, so it is
necessary to check the thickness of the brake disc at multiple
positions of the brake disc. And check its appearance to confirm
whether the brake disc is damaged, cracked or deformed.
If the thickness of the brake disc is lower than the specified value:
please replace the brake disc.
If the brake disc is damaged, cracked or deformed: please replace
the brake disc
63
