Idiomas disponibles
Idiomas disponibles
1)WORK
A REA SAFETY
a) Keep work
area clean
and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres,
such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children
and bystanders
away while
operating
a power
tool.
Distractions
can cause
you to lose control
2) ELECTRICAL
SAFETY
a) Power tool
plugs must match
the outlet. Never modify
the plug in any way. Do not use
any adapter
plugs with earthed
(grounded)
power tools.
Unmodified
plugs and matching
outlets
will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces
such as pipes, radiators,
ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded,
c) Do not expose
power
tools to rain or wet conditions.
Water entering
a power
tool will
increase
the risk of electric
shock.
d) Do not abuse
the cord.
Never use the cord
for carrying,
pulling or unplugging
the power
tool.
Keep cord away from
heat, oil, sharp edges
or moving
parts. Damaged
or entangled
cords increase
the risk of electric shock.
e) When
operating
a power tool
outdoors,
use an extension
cord
suitable
for outdoor
use.
Use of a cord suitable
for outdoor
use reduces
the risk of electric shock,
f) if operating
a power tool in a damp
location is unavoidable,
use a ground
fault circuit
interrupter
(GFCI) protected
supply.
Use of a GFCI reduces
the risk of electric shock.
3) PERSONAL
SAFETY
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs,
alcohol
or medication.
A moment of inattention while operating power tools may result in serious personal injury,
b) Use personal
protective
equipment.
Always
wear eye protection.
Protective
equipment
such as dust mask, nonskid
safety shoes,
hard hat, or hearing
protection
used for appropriate
conditions
will reduce personal
injuries.
c) Prevent
unintentional
starting.
Ensure
the switch is in the off position
before
connecting
to
power source
and/or
battery
pack, picking
up or carrying
the tool. Carrying
power tools with
your finger on the switch or energizing
power tools that have the switch on invites accidents.
d) Remove
any adjusting
key or wrench
before
turning
the power
tool on. A wrench or a key
left attached
to a rotating
part of the power tool may result in personal
injury.
e) Do not overreach.
Keep
proper
footing
and balance
at all times.
This enables
better control
of the power tool in unexpected
situations.
f) Dress properly.
Do not wear loose clothing
or jewelry.
Keep your hair, clothing
and gloves away
from moving
parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g) If devices are provided
for the connection
of dust extraction
and collection
facilities,
ensure these
are connected
and properly
used. Use of dust collection can reduce dust-related hazards,
4) POWER
TOOL
USE AND CARE
a) Do not force
the power tool.
Use the correct
power
tool for your application.
The correct
power
tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power
tool if the switch does
not turn
it on and off. Anypower
tool that
cannot be controlled
with the switch
is dangerous
and must be repaired.
c) Disconnect
the plug from
the power source
and/or
the battery
pack from
the power tool
before
making
any adjustments,
changing
accessories,
or storing
power
tools.
Such
preventive
safety measures
reduce
the risk of starting
the power tool accidentally.
d) Store idle power tools
out of the reach of children
and do not allow
persons
unfamiliar
with
the power tool or these
instructions
to operate
the power tool.
Power tools are
dangerous
in the hands of untrained
users.
e) Maintain power tools. Check for misalignment
or binding
of moving
parts, breakage of parts and
any other condition
that may affect the power tool's
operation,
if damaged,
have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools,
3
