Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Possible Cause
• Dry, corroded blades.
• Blades or blade support bent.
• Bent or damaged teeth.
• Loose blade bolts.
• Battery not installed properly.
• Battery not charged.
• Lock off not fully operated.
Problem
• Slow running,
noisy or hot
blades.
• Unit will not start.
• Battery won't
charge.
• Battery not inserted into charger.
• Charger not plugged in.
• Surrounding air temperature too
hot or too cold.
Possible Solution
• Lubricate blades.
• Straighten blade or blade
support.
• Straighten teeth.
• Tighten blade bolts.
• Check battery installation.
• Check battery charging
requirements.
Check that lock off is fully pulled
back prior to moving main
trigger.
• Insert battery intocharger untilgreen
LED appears. Charge up to 8
hours if battery totally drained.
• Plug charger into a working
outlet. Refer to "Important
Charging Notes" for more
details.
• Check current at receptacle
by plugging in a lamp or other
appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn
out the lights.
• Move charger and tool to a
surrounding
air temperature
of
above 40 degree F (4.5°C) or
below 105 degree F (40.5°C).
11
