Idiomas disponibles
Idiomas disponibles
MAINTENANCE
!_WARNING:
REMOVE
BATTERY
PACK BEFORE
SERViCiNG,
CLEANING
OR REMOVING
MATERIAL
FROM THE GARDENING
APPLIANCE.
The cutting blades are made from high quality, hardened
steel and with normal
usage, they will not require resharpening.
However,
if you accidentally
hit a wire
fence (figure
H), stones,
glass or other hard objects, you may put a nick in the
blade. There is no need to remove this nick as long as it does not interfere with
the movement
of the blade. If it does interfere,
remove the battery and use a fine
toothed file or sharpening
stone to remove the nick. If you drop the trimmer,
carefully
inspect it for damage.
If the blade is bent, housing
cracked,
handles
broken or if you
see any other condition
that may affect the trimmer's
operation
contact your local
Craftsman
_ Service Center for repairs before putting it back into use.
Fertilizers
and other garden chemicals
contain
agents which greatly accelerate
the corrosion
of metals.
Do not store the unit on or adjacent
to fertilizers
or chemicals.
With the battery removed,
use only mild soap and a damp cloth to clean the unit. Never let any liquid
get inside the unit; never immerse any part of the unit into a liquid. Prevent the blades from rusting by
applying
a film of light machine
oil after cleaning.
This device complies
with part 15 of the FCC rules. Operation
is subject to the following
two
conditions:
(1) This device
may not cause harmful
interference,
and (2) this device must accept any
interference
received,
including
interference
that may cause undesired
operation.
NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital device,
pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable
protection
against
harmful interference
in a residential
installation.
This equipment
generates,
uses and can
radiate radio frequency
energy and, if not installed and used in accordance
with the instructions,
may
cause harmful interference
to radio communications.
However,
there is no guarantee
that interference
will not occur in a particular
installation.
If this equipment
does cause harmful
interference
to radio or television
reception,
which can
be determined
by turning the equipment
off and on, the user is encouraged
to try to correct the
interference
by one or more of the following
measures:
• Reorient
or relocate the receiving
antenna.
Increase the separation
between
the equipment
and receiver.
Connect
the equipment
into an outlet on a circuit different
from that to which the receiver
is
connected.
Consult the dealer or an experienced
radio/TV
technician
for help.
Changes
or modifications
to this unit not expressly
approved
by the party responsible
for compliance
could void the user's authority
to operate the equipment.
This Class B digital apparatus
complies
with
Canadian
ICES-003.
z_CCESSORIES
ARNING:
DO NOT USE THE HEDGE TRIMMER
WiTH ANY TYPE
OF ACCESSORY
OR
ATTACHMENT.
SUCH USAGE
MIGHT
BE HAZARDOUS.
THE RBRC
TM
SEAL
The RBRC
TM
(Rechargeable
Battery
Recycling
Corporation)
Seal on the Ll-ION battery
(or battery
pack) indicates that the costs to recycle the battery
(or battery
pack) at the
end of its useful life have already
been paid by Craftsman
_.
RBRC
TM
in cooperation
with Craftsman
C_ and other battery users, has established
programs
in the United States to facilitate the collection
of spent LI-ION
batteries.
Help protect
our
environment
and conserve
natural
resources
by returning
the spent Ll-ION battery to an authorized
Craftsman
_ service center or to your local retailer for recycling.
You may also contact your local
recycling
center for information on where to drop off the spent battery.
RBRC
TM
is a registered
trademark
of the Rechargeable
Battery Recycling
Corporation.
10
