Idiomas disponibles
Idiomas disponibles
Grill Head to Cart
6
This step requires two people to lift and position the grill head onto cart.
Remove the tie wraps and packing material from the regulator hose, side burner valve and igniter
wire. Pull the hose and igniter wire out to the right side of the grill head.
Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wire are
hanging outside the cart.
Line up the control panel so that it is flush with the front panels. Attach the head to the cart with
(4) M6x13 screws.
M6x13 Screw
Qty: 4 pcs
24
