Idiomas disponibles
Idiomas disponibles
properly lower the kickstand. Put the kickstand back in place
before resuming use of the device.
- Make sure that the mains voltage matches the voltage
stated on the device marking and that the wall outlet is
earthed before charging the device.
- Check the charger cable and casing regularly for visible
damage. Do not use the device if the charger cable, socket,
or structure are damaged, do not work properly, or have
fallen, and contact the official Cecotec Technical Support
Service immediately. If the power cable is damaged, it must
be replaced with a special cable or set to be supplied by the
official Cecotec Technical Support Service. The power cable
is to be properly discarded.
- When you wish to disconnect the charger, pull from the plug,
never the cable. Do not touch the device or its plug with wet
hands.
- Check wheel pressure before every use. Remember that a
low pressure may reduce the battery life.
- WARNING! Regularly check the condition of components or
parts subject to wear or fatigue, such as the main frame,
fork, wheels, brakes, etc. This will allow you to detect
cracks or damage in high-stress areas that may indicate the
component's service life has been exceeded and it needs
to be replaced. Regular maintenance of the electric scooter
and its components will extend its service life. Periodically
check the tightness of the bolted parts, especially the wheel
axles, the folding mechanism, the steering system, and the
braking system.
- Use this device only with the power supply unit provided and
with an original and compatible Cecotec battery.
- WARNING: to recharge the battery, use only the power supply
unit provided with the device, reference GJS150-5760200.
12
- We recommend you charge the battery after every use and
before it completely runs out of battery.
- WARNING! Keep plastic packaging out of the reach of children
to prevent suffocation.
- Do not immerse the cable, plug, or any other non-removable
part of the device in water or any other liquid. Do not expose
the electrical connections to water. Make sure your hands
are dry before handling the plug or switching on the device.
Do not drive near high-humidity areas.
- Note that the braking distance will be longer in puddles, wet
surfaces, and/or in wet-weather conditions. The vehicle is
intended for use on flat, level, and dry surfaces.
- Do not use electronic devices, make calls, or listen to music
while using the device.
- Check the current local regulations. Strictly consider your
health and body condition. You should consult your doctor
to determine if you have any physical or health conditions
that could create a risk to your safety or prevent you from
properly using the device. The device can be used by one
person at a time only.
- Do not ride the device under the influence of alcoholic drinks,
drugs, or medicine whose consumption is not compatible
with driving.
- Do not use the device in hazardous areas where flammable
or explosive substances, liquids, or dirt may be present.
- Do not place heavy objects on the handlebar. Any load
attached to the handlebar will affect the stability of the
electric scooter.
Battery safety instructions
- This device includes a lithium-ion battery.
- Unplug the battery from the charger before driving the
MAKALU PRO
13
